Your toilets aren’t flushing properly, and water is backing up into other drains because multiple drains are clogged. Having this problem with your home’s plumbing? It’s probably a clog in the main sewer system. There’s a good chance you’ll think of using a drain snake to remove this clog. Hydro jetting, however, is a method that may be used in this case and will produce better outcomes.
For hydro jetting, a flexible hose is used to direct a high-pressure water stream into a pipe. A plumber will inspect the sewage line before attempting this kind of repair so that they can get a better idea of how extensive the damage is. The average pressure used by these systems is 35,000 psi, which is well than enough to break apart even the toughest clogs. While hydro jetting is more expensive than other methods, it can save money in the long run if you need to clear out a main sewer line.
When is the use of hydro jets warranted?
When should you contact a plumber for more information about hydro jetting? If there are tree roots in your pipes, many drains and plumbing fixtures are backing up, your pipes are blocked with oil and hairs, or you want your pipelines cleansed out before they are relined, hydro jetting may be the solution. This method will also eliminate the potential for future hazardous waste backups.
While chemical agents to breakdown a blockage or just unplugging the main sewer line may be less expensive, they won’t be as effective as hydro jetting in situations where hydro jetting is required. These are remedies for smaller, less challenging clogs. When it comes to serious obstructions, sometimes even the most powerful force-ball plunger isn’t enough.
A drain snake may or may not be able to clear your blockage, depending on the nature and location of the obstruction. A snake won’t help you if the clog is particularly stubborn or located deeper in the drain system. If you are looking into hydro jetting, you have probably previously tried and failed to use a snake to clear out your main sewage line.
Hazardous substances can irritate or even destroy the mucosal lining of the respiratory tract, skin, and eyes. Only specific kinds of obstructions can be removed with them, which is a major limitation. Using them incorrectly could make matters worse.
Note: You can compare plumbing quotes for best offer in hydro jetting.
HOW MUCH DOES IT COST TO HYDRO JET A DRAIN PIPE?
Unclogging a sewer pipe can cost a typical American household anywhere from $100 to $900. If you have a clogged sewage line, expect to pay between $350 and $600 to have it hydro jetted. Hydro jetting may cost $1,000 or more, depending on the severity of the issue. Hydro jetting is more expensive than snake your sewer system, but the results are long-lasting because it eliminates obstructions rather than just punching holes in them.
COST FOR NEW SEWER LINE
The use of hydro jetting is not always the best solution. When pipes are severely corroded or broken beyond repair, this can occur. Hydro jetting is not recommended in these situations because the pressure may cause additional pipe damage.
Sewer main repairs can run anything from $1,000 to $7,500 on average. Hydro jetting’s ability to blast the waste out of the pipelines that attract and collect it means that it can assist prevent the clog from reoccurring. Selecting hydro jetting now can extend the life of your repairs, allowing you more time to save up for this costly overhaul.