Every technical device comes with a number of LED lights located on it. Netgear EX2700 range extender would also have come with the same. Each light depicts something different about the networking device. For example, if the LED on your Netgear extender is green, it means that it is working fine, if the LED is orange, then there are some connectivity issues on the way, but, if the LED is blinking red, then zero things are right with the device. Know that even if you have performed Netgear EX2700 setup properly, facing this issue is very common.
However, the good thing is that you can kiss your days of worrying goodbye. The reason being, in this post, we have highlighted every troubleshooting hack required to help you get rid of the issue at hand. Thus, wait no more and go through this 5-minute read.
[Fixed] Netgear EX2700 Extender Red Light Issue
1. Restart the Netgear EX2700
In case you have not tried to restart your Netgear EX2700 wireless range extender yet, then you ought to do it now. Restarting the device has been known to fix a number of issues for users. There is a very high possibility that you will be able to do the same.
Taking this into consideration, it is recommended that you restart your Netgear EX2700 device immediately. In order to do so, you need to unplug your device from its wall socket, hold on for some time, and then reverse the first step.
After this, check if you are able to convert the blinking red light on your Netgear EX2700 range extender to green. If you do, congratulations! On the off chance, you do not; consider taking your attention to the next troubleshooting tactic.
2. Switch the Connection Source
What is that? Have you connected the networking devices with the help of a wireless source of connection? Well, you did not make the right decision. Making use of a wireless source can make the signals of your Netgear EX2700 extender drop anytime.
To rectify your mistake, it is recommended that you switch to a different connection source, i.e. a wired source of connection. After that, check again, if the red light issue has hopped off of your back. On the off chance, you are still experiencing it, you already know what to do.
3. Check the Cable Connection
Sometimes, using a damaged cable to connect the Netgear EX2700 extender to the host router can also cause the red light issue. To take care of the problem, you need to replace the existing cable with a new one that ought to be brought from the market.
While connecting the networking devices with the help of the new cable, it is recommended that you ensure two things. One, the connection between the networking devices should be finger-tight and two, the new cable should not have cuts on it.
4. Do Extender Firmware Update
Can you recall the last time you upgraded the firmware of your Netgear EX2700 wireless range extender to its latest version? Is that a no? Well then, it is a sign that you need to give your device an update right away.
For this process, you can make use of two processes. The first one requires you to make use of the Nighthawk app and the other one requires you to access the user interface of your device. Remember, in both methods, your device should be accessing Netgear_ext SSID.
5. Keep WiFi Interference at Bay
Despite following the troubleshooting hacks mentioned above, are you still experiencing the Netgear EX2700 extender red light issue? Well, that might be because the signals emitted from your extender are either getting interfered with or blocked.
To troubleshoot the issue, you ought to change the location of your networking device. Amidst the process, ensure that you are not keeping it anywhere near metal objects, electronic devices, transmitting appliances, and reflexive surfaces.
Some examples include mirrors, cordless phones, microwave ovens, aluminum studs, fish tanks, washing machines, refrigerators, baby monitors, treadmills, Bluetooth speakers, televisions, etc. Also, do not keep the extender near concrete walls.
Conclusion
These were the troubleshooting hacks through which the Netgear EX2700 extender red light issue can be resolved. Hopefully, one of the hacks mentioned in this article helped you to turn the red LED light to green.
Apart from the ones mentioned above, if you are aware of any other hack through which the EX2700 extender red light issue can be fixed, then it is recommended that you share it with your fellow readers. You can do so via the comment section.
