Home » How to install Netgear Nighthawk AC3000 EX8000 ?

How to install Netgear Nighthawk AC3000 EX8000 ?

by janeausten
Netgear EX8000 Setup

A Tri Band wifi range extender, the Netgear AC3000 EX8000 Setup  is very simple to set up and use. The Nighthawk AC3000 has a dedicated 5 GHz band that can support speeds of up to 1.7 Gbps, which you can increase for your devices. 

Steps for Setting Up the Netgear Nighthawk X6S AC3000 EX8000 Extender

Netgear Nighthawk AC3000 EX8000 manually using the Netgear method:

  • Turn on your Netgear AC3000 EX8000 Setup when it’s close to your router.
  • After that, connect a power supply to the repeater.
  • Watch for the Power LED to go green.
  • Connect a network to the Netgear AC3000 EX8000 extender.
  • Go to mywifiext.net in a web browser on a computer or mobile device.
  • It displays the Netgear Genie configuration assistant.
  • Move your extender and connect your booster to the active WiFi network by following the on-screen instructions.
  • Relocate the repeater close to your router and try again until the Link Status LED turns white if you get no or a terrible connection.
  • Once you’ve chosen the best location for your repeater, connect your consumer devices to the extended WiFi network.

You can call us at our toll-free number or use our live chat if you need assistance if you are still having trouble with the setup procedure.

Netgear AC3000 EX8000 Setup with WPS Method

Now let’s discuss the wireless protected setup, which is the simplest and quickest approach to configure your Ex8000 (WPS). There is no need to enter a password, username, or SSID while configuring a Nighthawk AC3000 EX8000 using the WPS technique. Only one small button needs to be pressed to complete this configuration.

To setup your Netgear AC3000 EX8000 with W.P.S follow the steps given below.

  • The Nighthawk X6S AC3000 EX8000 WiFi extender should be turned on.
  • The router and WiFi booster should be placed in the same space.
  • Then, connect your repeater to a power outlet.
  • When the light becomes green, turn on the power.
  • Press the WPS button on the repeater.
  • Your router and booster are properly connected if the Netgear EX8000 Link Status LED is white.
  • Your extender’s position should be changed.
  • Bring a PC or mobile device with WiFi capabilities to a location with spotty WiFi router coverage.
  • Join the expanded connection using a computer or mobile device that supports WiFi.

You can call us at our toll-free number or use our live chat if you need assistance if you are still having trouble with the setup process.

Netgear EX8000 Manual Setup

Users must connect the Netgear EX8000 Nighthawk Mesh wireless range extender to their current WiFi modem or router in order to increase the range of their wireless network. Users should always be careful not to miss any steps of the installation assistant when manually setting up a Netgear AC3000 Nighthawk Extender because doing so would prevent the range extender from ever connecting to the wireless network.

 Follow the instructions below to manually configure your Netgear AC3000 EX8000 Setup:

  • Connect your Netgear AC3000 EX8000 Setup first.
  • Your extender is now turned on.
  • Ensure that the extender is situated close to the router.
  • Log on to your phone or other wifi-capable device.
  • Open a browser such as Chrome, Safari, or Microsoft Edge.
  • The installation window for the Netgear Ex8000 will now appear.
  • You must adhere to the instructions in order to proceed with this process.
  • You can now move the extender to your new preferred location.
  • You can connect your client devices to the extended wifi network after placing the extender in the perfect location.

How to Find Nighthawk AC3000 EX8000 firmware update ?

Does your WiFi repeater suddenly behave suspiciously? Despite a good Netgear repeater configuration, is the speed still inappropriate? If so, you must immediately update the Netgear EX8000 firmware. A set of instructions known as the Netgear AC3000 EX8000 firmware Update is included within the device.

Start by turning on your WiFi extender.

  • To use the Nighthawk X6S AC3000 repeater, a router must be connected.
  • Launch your favourite web browser after that.
  • Enter mywifiext.net and hit Enter in the address field.
  • Enter your repeater’s login and password.
  • Selecting the Firmware Update option under Settings.
  • Select the Check button to finish.
  • If a new version of the firmware is accessible, click yes to upgrade it.Wait a short while for the Netgear EX8000 firmware to update successfully.

Note: Do not unplug or remove the Netgear AC3000 EX8000 Setup  wifi extender from the power socket while updating the latest firmware.

How to factory reset the Netgear EX8000 ?

The majority of the time, a factory reset process is required anytime the admin username and password need to be retrieved. Resetting the Nighthawk AC3000 EX8000 will automatically get your extender ready for the new install process. Paper clips or firm needles are required for this operation.

  • The Netgear EX8000 WIFI Range Extender needs to be reset.
  • Your main router’s Netgear AC3000 EX8000 Setup should be plugged in the same room.
  • As soon as you notice the wireless repeater’s solid green power lights.
  • To reset the Netgear EX8000, locate any paper clip or toothpick.
  • The factory reset button on the extender should now be pushed and held for 10 to 15 seconds.
  • Your extender power light turns amber as you reset the AC3000.
  • Wait for the power led light to turn green before removing the pinhole.
  • To configure your Netgear EX8000 to work with your new modem or router, follow the instructions above.

You can call us at our toll-free number or use our live chat if you need assistance if you are still having trouble with the setup procedure.

Related Posts

MarketFobs is an online webpage that provides business news, tech, telecom, digital marketing, auto news, and website reviews around World.

Contact us: marketfobs.com@gmail.com

@2023 – MarketFobs. All Right Reserved.