Home » How To Connect To Wifi driver On Zorin?

How To Connect To Wifi driver On Zorin?

by janeausten
How To Connect To Wifi driver On Zorin?

You can automatically activate the wireless adapter to connect to your wireless network from Zorin OS. Verify your Wi-Fi connection to the Internet. Toggle the On or Off switch in the top bar to turn on the Wi-Fi adaptor. The ideal solution is to use your personal Wi-Fi network.

You need to appropriately download the Realtek WiFi driver in order to connect the WiFi on Zorin easily and without any error. Here in this article, we are going to discuss all the important points and steps to establish a successful connection and use effortlessly a WiFi network on your Zorin system.

Steps to Link to a WiFi Network

Follow the below instructions to perform this connection method.

  1. Press the icon of the indicator.
  2. This will enable the pop-up indicator menu on the right panel of your system.
  3. Choose the WiFi not connected option.
  4. Expand the option.
  5. Select the Select the network option.
  6. To connect to your Wi-Fi network, select it from the list. 
  7. To connect, you may have to provide the Wi-Fi network’s password.

Alternatively, you can try the below steps.

  1. Go to the Zorin Menu on your system.
  2. Head over to the Settings section.
  3. Now, move to the Wi-Fi section.
  4. Choose your preferred network from the menu.

If you are not able to connect using the above steps, then follow the below methods to fix this issue.

Ways to Solve the Connectivity Error on your System

The Wi-Fi panel might not show up in the App settings if Zorin OS is unable to identify your device’s Wi-Fi hardware. Refer to the below methods to fix this issue.

Try to switch ON – OFF the Wifi 

If your system has Wi-Fi hardware built in, it’s possible that the chip was already disabled at the firmware or hardware level. One of the following methods should allow you to re-enable it:

  • The specified keyboard action must be pressed to activate Wi-Fi. This often requires pressing Fn plus a function key denoted by a Wi-Fi symbol on laptops.
  • On your PC, locate a physical Wi-Fi switch, and turn it on.

Update your software to the latest version

To add support for the latest Wi-Fi gear, more recent device drivers and perhaps other operating systems are frequently already accessible.

Follow the below instructions to perform this method.

Select any of the following methods to link your device to the internet –

  1. Connect an Ethernet connection from your wifi router to an Ethernet port on your computer.
  2. To share your phone’s Internet access with your PC, tether it through USB.

Now, perform the following steps to run the update process.

  1. Go to the Zorin menu on your system.
  2. Choose the System tools option.
  3. Select the Software updater option.
  4. Now, search and install the newest version of updates.
  5. Reboot your system to confirm the changes.

Install the required drivers

To make some Wi-Fi hardware operate, you might be able to add more drivers. All users of Zorin OS cannot have all of these drivers pre-installed because some of them are covered by proprietary licensing.

Follow the below instructions to perform this method.

Select any of the following methods to link your device to the internet –

  1. Connect an Ethernet connection from your wifi router to an Ethernet port on your computer.
  2. To share your phone’s Internet access with your PC, tether it through USB.

Now, perform the following steps to run the installation process.

  1. Go to the Zorin menu on your system.
  2. Choose the System tools option.
  3. Select the Software updater option.
  4. Let the updating process get finished.
  5. Now, hit the Settings button.
  6. Move to the Additional driver’s section.
  7. A list of all the available drivers on your PC will be displayed.
  8. Choose any option that is named WiFi, Wireless, Broadcom, or WLAN.
  9. Now, hit the Apply Changes button.
  10. This will enable the installation process for your system’s WiFi drivers.
  11. Let the installation process get finished.
  12. Reboot your PC and apply the changes.

Switch Off the secure boot system

It’s possible that your computer’s Secure Boot option is preventing the computer from loading the Wi-Fi hardware drivers.

Follow the below instructions to perform this method.

  1. Turn the computer off. 
  2. Make that the device is not set to sleep or hibernation mode and is entirely off.
  3. Enable the computer. 
  4. Press the specified key repeatedly to access the BIOS/UEFI settings right away after the computer starts up. 
  5. That key must be noted on the screen upon computer startup or in the user guide. 
  6. Delete, Esc,  F12, F2, or some other function key are often the keys to press if you’re unclear which one to press.
  7. Use the arrow keys to select the “Boot” or “Security” tab at the BIOS/UEFI settings screen.
  8. Ensure that “Secure Boot” is not selected. 
  9. If it’s enabled, use the arrow keys to scroll to the bottom to it and then hit Enter to change it.
  10. To save the adjustments and leave the BIOS/UEFI settings page, press the corresponding key, typically the F10 key.
  11. The next moment you switch on your computer, it ought to be able to establish a wireless connection.

Conclusion

We hope this article helped you in establishing a successful and easy connection between your WiFi drivers and Zorin OS. Follow this guide step-wise to avoid any unnecessary errors in your system.

Related Posts

MarketFobs is an online webpage that provides business news, tech, telecom, digital marketing, auto news, and website reviews around World.

Contact us: marketfobs.com@gmail.com

@2023 – MarketFobs. All Right Reserved.