Wireless-N WiFi repeaters are emerging as one of the best WiFi devices in the market today. The reason is their astonishing features, ease of setup, and different operation modes. That is why you should consider doing Wireless repeater setup And, if you set up your Wireless-N repeater in the AP mode, it will work wonders. The AP mode will provide your Wireless-N repeater with all the qualities of an access point.
It means when in AP mode, your repeater will create a hotspot for devices in your house to access the internet. So, let’s begin the process of setting up a Wireless-N WiFi repeater.
Steps to Do Wireless-N Repeater Setup in AP Mode
- Power Up the Repeater
First of all, unpack your repeater and connect it to the wall socket. It should be properly connected to the wall outlet so that it can receive a fluctuation-free power supply. Apart from this, the wall outlet must not be short-circuited. Else, your WiFi repeater will get damaged.
However, you also need to ensure that your area is not suffering from power outages. If it is, then consider using a UPS. Once your repeater gets powered up properly, set the Mode Selector button to the AP position.
- Connect Repeater to Router
Now, the next step is to create a connection between the WiFi repeater and the host AP (router). So, bring both WiFi devices a little closer. But, know that closer never means zero distance. Therefore, you have to place both WiFi devices so tactfully that their WiFi signals neither clash nor struggle to communicate.
In case you want to use an Ethernet cable, it is recommended to properly insert one end into the router’s port whereas another into the WiFi repeater’s port. But, make sure that the Ethernet cable you’ve used is free of cuts. Else, you might get issues accessing the WiFi repeater login window.
- Load a Web Browser
Once you are done connecting your Wireless-N repeater and the host router, load a web browser. Any web browser like Google Chrome and Mozilla Firefox can be used. However, you can’t use an outdated version of the web browser. An outdated web browser can create a lot of mess during the repeater setup process in AP mode.
To be on the safer side, you can delete unnecessary files from the internet browser. It can be done by navigating to the Setting menu and clearing the cache, cookies, and browsing history.
- Access the Repeater’s IP
Move the mouse pointer to the address bar of the web browser. Note that the search bar can’t be used to access any web or IP address, especially what you are going to access for the Wireless-N repeater setup process. Type the repeater’s default IP address and press the Enter key. Wait for the Wireless WiFi repeater login window to display.
On the off chance, you fail to get redirected to the Wireless N WiFi repeater login window, then chances are that there are typos in the IP address entered by you. So, rectify your mistake and try to access the repeater’s IP address again.
- Log in to Your WiFi Repeater
As soon as you reach the repeater login window, fill in the default WiFi repeater login password and username into their respective fields. Once done, click the OK button.
Know that the extender’s default admin credentials are of case-sensitive nature. So, be careful while entering them. You can also take the help of the repeater’s user guide to know the default admin credentials.
- Follow On-Screen Prompts
The moment you hit OK, you will get welcomed by the dashboard of the repeater where a number of prompts will pop up. Walk through these instructions carefully and complete the Wireless-N repeater setup process in the AP mode.
Keep in mind to avoid refreshing the window while on-screen instructions are appearing. This might interrupt the Wireless-N repeater setup process and you might fail to install your device. Also, avoid disconnecting your Wireless-N repeater from the router and switching it off during the entire setup process.
Final Thoughts
Our post guiding the process to repeater setup via the Wireless-N WiFi repeater login page ends here. Hopefully, you will be able to make your device up and running in AP mode using the guidelines outlined in this pose. We wish you a wonderful internet journey with your Wireless-N WiFi repeater.
